Fire detectors Integral CUBUS

Fire detection technology for every use

 

Fire detectors watch over a building, almost invisibly, and fulfil a clear task: The reliable and deceptive alarm-proof detection of all fires in the formation phase. The multiple sensor detectors from Schrack Seconet have been tried and tested millions of times and are suitable for all types of systems - even in a wide range of ambient conditions. 

Smoke, heat and CO
Rapid fire detection and elimination of unwanted deceptive alarms
CUBUS levelling
Intelligent adjustment of smoke and heat sensitivity
Integrated event log memory
Recording of all events for complete traceability

Multiple sensor detector MTD 533X

A combined fire detector with smoke and heat sensor, optionally with integrated acoustics and / or voice output in 15 languages as well as different base variants. The sensors can be individually activated or deactivated depending on the area of use.

  • Reliable early fire detection
  • Highest deceptive alarm security
  • Permanent self-monitoring
MTD 533X
Contamination compensation
Integrated short circuit insolator
Simple 1:1 replacement of older detector
MTD 533X

Multiple sensor detector MTD 533X

A combined fire detector with smoke and heat sensor, optionally with integrated acoustics and / or voice output in 15 languages as well as different base variants. The sensors can be individually activated or deactivated depending on the area of use.

  • Reliable early fire detection
  • Highest deceptive alarm security
  • Permanent self-monitoring
Contamination compensation
Integrated short circuit insolator
Simple 1:1 replacement of older detector

Multiple sensor detector CMD 533X

Improved early fire detection combined with reliable protection against carbon monoxide poisoning: The CMD 533X fire detector combines a smoke and heat sensor with CO detection and ensures reliable detection even with dust and steam.

  • Reliable early fire detection
  • Elimination of deceptive alarms
  • Permanent self-monitoring
CMD 533X
Contamination compensation
Integrated short circuit insolator
Durable carbon monoxide cell
CMD 533X

Multiple sensor detector CMD 533X

Improved early fire detection combined with reliable protection against carbon monoxide poisoning: The CMD 533X fire detector combines a smoke and heat sensor with CO detection and ensures reliable detection even with dust and steam.

  • Reliable early fire detection
  • Elimination of deceptive alarms
  • Permanent self-monitoring
Contamination compensation
Integrated short circuit insolator
Durable carbon monoxide cell

Multiple sensor detector MMD 130 Ex-i

The combined smoke and heat detector MMD 130 Ex-i is used for fire detection in case of explosion hazard and meets the applicable requirements for hazardous building areas of zones 1 and 2.

  • Smoke and heat detection
  • Reliable early fire detection
  • Highest deceptive alarm security
MMD 130 EX-I
Permanent self-monitoring
Contamination compensation
Intrinsically safe design
MMD 130 EX-I

Multiple sensor detector MMD 130 Ex-i

The combined smoke and heat detector MMD 130 Ex-i is used for fire detection in case of explosion hazard and meets the applicable requirements for hazardous building areas of zones 1 and 2.

  • Smoke and heat detection
  • Reliable early fire detection
  • Highest deceptive alarm security
Permanent self-monitoring
Contamination compensation
Intrinsically safe design

Duct smoke detector LKM 593X

For fire smoke detection in ventilation systems and at locations with high air velocity and high smoke dilution. Thanks to early smoke detection, an immediate message to the fire alarm control panel prevents fire and smoke from spreading through the ventilation system within the building.

  • Reliable early fire detection
  • Complete set with transparent case
  • Easy service from outside
  • Direct connection to the loop
LKM 593X
For all types of ventilation ducts
Integrated short circuit insolator
Air velocities up to 20 m/s
LKM 593X

Duct smoke detector LKM 593X

For fire smoke detection in ventilation systems and at locations with high air velocity and high smoke dilution. Thanks to early smoke detection, an immediate message to the fire alarm control panel prevents fire and smoke from spreading through the ventilation system within the building.

  • Reliable early fire detection
  • Complete set with transparent case
  • Easy service from outside
  • Direct connection to the loop
For all types of ventilation ducts
Integrated short circuit insolator
Air velocities up to 20 m/s
Show more
Christian Ackerl
Safety Expert and Fire Protection Officer | Takeda
It is no coincidence that we have chosen Schrack Seconet time and again for our seven Viennese production facilities.
Let's get to know one another
From person to person to protect people and values. With us, you can expect international experience, many years of know-how as an innovation leader and many excellent solutions.

More information

Components for Integral CUBUS

From hardware to software, we supply all system components and ensure that your investment in a Schrack Seconet fire alarm system remains economical and profitable, throughout its entire life cycle. A perfectly-coordinated integrated solution is thereby created in combination with our accompanying services.

Show details

Fire alarm system Integral EvoxX

Show details

The best fire alarm control panel in the world – at least that's what our customers say. It is completely configurable in a redundant way, so you are well protected at all times.

  • For all system sizes
  • Modular and redundant
  • Extendable at any time
Fire alarm control panels Integral EvoxX
Show details Fire alarm control panels Integral EvoxX

Fire alarm system Integral EvoxX

The best fire alarm control panel in the world – at least that's what our customers say. It is completely configurable in a redundant way, so you are well protected at all times.

  • For all system sizes
  • Modular and redundant
  • Extendable at any time
Show details

Integral X-LINE

Our automatic fire detectors, sirens, flashing lights, manual call points and intelligent input and output modules are connected to the Integral EvoxX fire alarm control panel via the powerful Integral X-LINE loop. Up to 3500 meters loop length and 250 devices are possible. Short starting times – even when fully expanded.

  • Reliable transmission
  • Highest fail safety
  • Easy installation
  • Flexibly expandable
Fire alarm panel Integral EvoxX - Integral X-Line
Use of existing cabling possible
Integrated short circuit isolators in each device
Fire alarm panel Integral EvoxX - Integral X-Line

Integral X-LINE

Our automatic fire detectors, sirens, flashing lights, manual call points and intelligent input and output modules are connected to the Integral EvoxX fire alarm control panel via the powerful Integral X-LINE loop. Up to 3500 meters loop length and 250 devices are possible. Short starting times – even when fully expanded.

  • Reliable transmission
  • Highest fail safety
  • Easy installation
  • Flexibly expandable
Use of existing cabling possible
Integrated short circuit isolators in each device

Networking

From large buildings to remote locations – with Integral LAN or Integral WAN, Schrack Seconet offers a networking solution that can be expanded as required for all types of system configurations. Up to 4,049 fire alarm control panels of different generations can be integrated into one system. 

  • Diverse transmission technologies
  • Highest fail safety due to duplicated structure
  • Integration into existing network structures
Integral EvoxX fire alarm control panel - networking (Integral LAN / WAN)
The only Full-IP network with optical fibre on board
Stub, ring or mesh networks
Integral EvoxX fire alarm control panel - networking (Integral LAN / WAN)

Networking

From large buildings to remote locations – with Integral LAN or Integral WAN, Schrack Seconet offers a networking solution that can be expanded as required for all types of system configurations. Up to 4,049 fire alarm control panels of different generations can be integrated into one system. 

  • Diverse transmission technologies
  • Highest fail safety due to duplicated structure
  • Integration into existing network structures
The only Full-IP network with optical fibre on board
Stub, ring or mesh networks
Show details

Extinguishing control panels Integral EvoxX

Show details

The only extinguishing control panel that can be implemented together with a fire alarm control panel in one case and combines fire detection, alarm notification and control of an extinguishing system.

  • Highest availability and secure extinguishing
  • Suitable for all extinguishing technologies
Extinguishing control panels Integral EvoxX
Show details Extinguishing control panels Integral EvoxX

Extinguishing control panels Integral EvoxX

The only extinguishing control panel that can be implemented together with a fire alarm control panel in one case and combines fire detection, alarm notification and control of an extinguishing system.

  • Highest availability and secure extinguishing
  • Suitable for all extinguishing technologies
Show details
Show more

Good to know

Frequently asked questions and their answers

Can the fire detectors be painted by the customer?

No. For proper colouring, it is necessary to disassemble a fire detector into individual parts. However, this leads to the loss of the calibration and thus the approval. A paint test without dismantling into individual parts can in turn lead to contamination of the measuring chamber and the temperature sensor - and thus to faulty functioning.

Is time-controlled switching between heat and smoke detection possible?

Yes. Our Cubus automatic fire detectors can be configured to be time-controlled and can detect heat during the day and smoke at night, for example. This setting is mostly used in commercial kitchens. 

Where are the fire detectors manufactured?

Our fire detectors all come from our own production and are developed and produced by our group sister Hekatron in Germany.

What types of fire detectors are available?

Modern fire detectors can be roughly divided into three groups:

  1. Non-automatic fire detectors (manual alarm notification)
  2. Automatic fire detectors
  3. Special fire detectors for special applications

Depending on the type of sensor technology, automatic fire detectors are divided into multiple sensor detectors, smoke detectors, heat detectors, fire gas detectors (CO) and flame detectors.

What is the difference between multiple sensor detectors and smoke detectors?

Multiple sensor detectors work with several different sensors and thus combine different fire detection systems in one device (e.g. smoke detectors, heat detectors and fire gas detectors). This means that only one detector is required for all applications.

Smoke detectors only have one sensor and are only triggered if smoke particles enter the measuring chamber, these smoke particles scatter a light beam emitted by an infrared diode and parts of this scattered light fall on a light-sensitive sensor (scattered light principle). Smoke detectors are mainly used to detect smouldering fires.

What criteria are used to select a suitable fire detector?
  1. Predominant environmental and ambient conditions
  2. the room height
  3. and the expected fire characteristics

 

are used to select the correct fire detectors.

How are the quantity and arrangement of the fire detectors determined?

On the one hand, the quantity and arrangement of the automatic fire detectors depends on nationally applicable standards / guidelines and, on the other hand, it depends on the type of detectors used, the room geometry, the type of use and on the ambient conditions in the rooms to be monitored. The detectors must be selected in such a way as to reliably detect fires in their formation phase and to prevent deceptive alarms.

Are the fire detectors available in different colours?

Yes. Our fire detectors can be provided in all RAL colours on request. Optionally, up to two gloss levels are possible (silk matt and gloss). However, our fire detectors are white (RAL 9003) as standard.

What does contamination compensation or contamination prediction mean?

Multiple sensor detectors and smoke detectors are only triggered if smoke particles enter the measuring chamber, these smoke particles scatter a light beam emitted by an infrared diode and parts of this scattered light fall on a light-sensitive sensor (scattered light principle). Over years, more and more dirt particles get into this measuring chamber, which can lead to deceptive and false alarms.

Our automatic fire detectors permanently monitor your measuring chamber for contamination. If dirt particles are detected in the measuring chamber, they adjust their alarm sensitivity so that the detector remains reliable and fully functional regardless of its contamination. This process is called pollution compensation.

By means of the contamination prediction, the detector independently provides information when replacement becomes necessary and the contamination compensation is no longer sufficient. 

What is the difference between smoke detectors and fire detectors in a fire alarm system?

According to European standards, smoke alarms cannot and must not be used with an automatic fire alarm system that ensures reliable alarm notification of action forces. Therefore, smoke alarms are mainly used on the house and apartment market, where there are no official requirements for an automatic fire alarm system. In addition, smoke alarms are powered by batteries and it must be possible to check their function manually – e.g. by pressing a button.

Downloads

Fire Alarm

References

Clients who already place their trust in us

Show More

Further topics

This might also be of interest to you

Fire Alarm | System
Special fire detectors for extraordinary challenges
.
Fire Alarm | System
Extinguisher control panels Integral EvoxX
.
Fire Alarm | System
Peripherals for Integral EvoxX
.
Service | Security | Health Care | Fire Alarm
Life cycle support
.
Fire Alarm
Expert for reliable fire detection and alarm notification
.
Fire Alarm | Health Care | Security | Service
Frequently asked questions and their answers
.
otvorenie nitrianske nákupné centum Galéria obchodná sie hypermarket Tesco služby zákazníci nakupujúci
Fire Alarm | Customer Story
Remote access to the fire alarm systems at Tesco
.
Fire Alarm | Customer Story
Fire safety with mobile app in Klosterneuburg
.
Fire Alarm
Expert for reliable fire detection and alarm notification
.
Fire Alarm | Customer Story
New era of neutron research
.